製造業‎ > ‎電腦輔助設計‎ > ‎

GearTrax

張貼者:2010年10月3日 上午9:37未知的使用者   [ service orderble 已於 2011年5月26日 上午7:34 更新 ]
Geartrax主要用於精確齒輪的自動設計和齒輪副的設計,通過指定齒輪類型、齒輪的模數和齒數、壓力角以及其它相關參數,Geartrax可以自動生成具有精確齒形的齒輪。 為工程師提供了一種簡單易用的、在Solidworks內部就可完成的驅動零件實體造型工具。 可以設計的齒輪類型包括直齒輪、斜齒輪、錐齒輪、鏈輪、漸開線、齒形帶齒輪、蝸輪和蜗杆、花鍵、V帶齒輪等。


開發商:Camnetics, Inc.
原廠網址:http://www.camnetics.com/geartrax/index.htm
更新日期:2011/05/26
採購正式版、大量授權報價、技術支援、軟體諮詢、委託採購、詢問報價請來電 02-29299388 分機16 , 
來信service@orderble.com,或點我
-----------------------------------------------------------------------------


特點:

-直觀和簡單,但功能強大!
-球場徑和模塊
-支持國際標準
-塑料齒輪標準
-真正的漸開線齒廓
-自動增編修改
-用戶控制所有設備的屬性
-安裝集線器和反孔
-鍵槽的ANSI和BS期權度量
-很實惠
點和點擊來創建:
-正齒輪和螺旋齒輪
-內部齒輪組
-錐齒輪組
-蝸輪
-漸開線花鍵
-同步帶輪
-鏈輪
-V型皮帶輪
-100的安裝方式

一些重要的信息GearTrax

-漸開線花鍵是splines.What?漸開線花鍵通常用來連接一齒輪軸。 通常情況下,漸開線花鍵是在雙,外花鍵和內花鍵。
-內齒輪。創建內部齒輪組已經改良,GearTrax.It很容易創建一組齒輪,一個內部的和一個小齒輪作為匹配。
-正齒輪齒花鍵和漸開線齒幾何,現在可以添加到任何素描SolidWorks.This可以很容易地添加齒輪牙齒任何部分或多個牙齒幾何到一個組成部分。
-直齒和斜齒的截齒擠壓功能,而不是老闆擠在一個基本特徵。 一個客戶數量要求就是使他們可以抑制齒模式,仍然有齒輪“空白”,以檢查是否存在干擾。此外,有些人認為它會很好,如果齒輪模型更類似於製造過程。





Features:

-Intuitive and simple, yet powerful!
-Diametral and Module pitches
-International standards supported
-Plastic gear standards
-True involute tooth profiles
-Automatic addendum modification
-User control of all gear properties
-Mounting hubs and counter bores
-ANSI and BS metric keyway options
-Very affordable
Point and Click to Create:
-Spur and Helical Gears
-Internal Gear Sets
-Bevel Gear Sets
-Worm Gears
-Involute Splines
-Timing Belt Pulleys
-Chain Sprockets
-V-Belt Pulleys
-100's of Mounting Styles

Some important information about GearTrax

-Involute splines.What are involute splines?Involute splines are commonly used to attach a gear to a shaft. Normally, involute splines are made in pairs, an external spline and an internal spline.
-Internal gears. Creating internal gear sets has been improved with GearTrax.It is easy to create a set of gears, one internal and one pinion gear as a matched set.
-A spur gear tooth and involute spline tooth geometry can now be added to any sketch in SolidWorks.This makes it very easy to add gear teeth to any part or multiple teeth geometry to a single part.
-Spur and helical gear teeth are cut-extruded rather than the tooth feature boss-extruded on a base feature. A number of customers asked for this so they could suppress the tooth pattern and still have the gear "blank" to check for interference. Also, some thought it would nice if the gear model more resembled the manufacturing process.
-Adding mates to GearTrax products is now much simpler.All products are created with the center of the gear, pulley etc., being on a plane.In other words, the length of the belt or chain center will now be centered on a plane.This is a big improvement for mating parts in an assembly.